Computer Controlled Electro-hydraulic Universal Tensile Testing Equipment is equipped with computer, printer, and general test software, to give an accurate determination of metal the material tensile strength, yield strength, the provisions of non-proportional extension strength, elongation, elastic modulus mechanical properties. Test results can print (force - displacement, force - deformation, stress - displacement, stress - deformation, force - time distortion - time) six kinds of curves and related test data, with the software self-test function that can self-diagnose problems. It is ideal testing equipment for the industrial and mining enterprises, scientific research units, universities, engineering quality supervision station. They are perfect testing instrument project quality testing section, universities and colleges, research institution and industrial and mining.

2. Standard:

ASTM E8Standard Test Methods for Tension Testing of Metallic Materials

ASTM E4 -16 Standard Practices for Force Verification of Testing Machines

ISO6892-1:2016 Metallic materials — Tensile testing — Part 1: Method of test at room temperature

ISO75000-1:Metallic materials--Verification of static uni-axial testing machines--Part 1: Tension/compression testing machines--Verification and calibration of the force-measuring system

3. Main Technical Parameters:

Model	UTM-600D
Max.load	600kN
Load accuracy	Class 1 (class 0.5 optional)
Load range	1%-100%FS (0.4%-100%FS optional)
Load resolution	1/500000
Deformation Measurement Range	0.2%～100%FS
Deformation accuracy	≤±1 % (≤±0.5% optional)
Displacement resolution	0.01mm
Displacement accuracy	≤±1 % (≤±0.5% optional)
Displacement error	≤±1 %
Stress Control Speed	1～45 Mpa/s
Stress Control Speed	0.001～0.5 mm/s
Displacement Control Speed	0.02～3 mm/s
Constant load, deformation and displacement control accuracy	When rate <10% FS, the precision± 1% When rate ≥ 10% FS, the precision ±0.5％
Stress rate accuracy	When rate < 0.05% FS/s, the precision± 2% When rate ≥ 0.005%FS/s, the precision ±0.5％
Piston Stroke	200mm
Max. tension test space	700mm
Max. Compression test space	650mm
Column distance	505mm
Clamping method	Hydraulic Automatic Clamp Fixture
Round specimen clamping range	Φ13-Φ40mm
Flat specimen clamping range	0-15,15-30mm
Compression plate	Φ160mm
Bending roller width	30x120mm
Bending span	30-450mm
Power supply	3-phase, 380V, 50HZ 2.0kw (can be customized)

Packing size and weight

Model	UTM-600D
Main body size	1050x800x2500mm
Oil control cabinet	1130x750x930mm
Total weight	1800kg

4. Main Unit Feature:

4.1 Rigid inblock cast base with fuel tank mounted under the host and upper space for tensile and lower one for compression bending or shear test

4.2 Solid Four columns and two screws design guarantees the strong stability for the machines.

4.3 chain mechanism eliminating the gap and improving the measurement performance.

4.4 Japanese imported gear pump features high pressure and low-noise

4.5 With reference to hydraulic system, the electromagnetic valve, relief valve, pressure relief valve, valve pressure and other hydraulic components are applied well-known brands. Servo valve, as the corn parts, applies Atos Brand.

4.6 Load automatic withstanding, stress, strain control, cycle control and self-programming. 4.7 Precise load sensor for guarantee accurate and stable measure

4.8 Overload protection: as test force exceeds 2%-5% of the maximum test force of each file, overload protection, it will stop.

6. Data Acquisition systems

61. The data acquisition system of machine consists of two high precision A/D conversion channel and the maximum resolution should be 1/300000 (minimum)

6.2. USB powered data –logger with USB 2.0 and RS- 232 pc interface, 5-keys joystick, 2MB RAM, Automatic recognition facility, Internal signal generator and 12-bit conversion resolution

7 Software (MAX TEST)

7.1 Batch and report processing program facility in doc and exl format 

7.2 The software is fully compliance with the corresponding international standards like ISO, ASTM and GB standards 

7.3 The control mode of software should contain constant force, constant displacement, constant deformation and others like Stress - strain, force - displacement, force - time, displacement – time

7.4 It supports multiple load cell and extensometer 

7.5 Reserved data interface facility, which can be directly connected to integrated management network of laboratory. 

7.6 The software is for Windows98/2000/XPAV in7 or higher 

7.7 The software supports Real-time record and dynamic display test curve

7.8 The software adopts human-computer interaction to analyze and count performance indicators of materials.

7.9 The software can automatically figure-out routine data such as tensile strength, yield strength, modulus of elasticity, extend rate after rupture, non-proportional extend strength et

7.10 Getting the test results: get the ReH, ReL, Fm, Rp0.2, Rt0.5, Rm, E results automatically.

Main view